Transmitting A Status - Icom IC-F3160 SERIES Operating Manual

2
BIIS 1200 OPERATION

■ Transmitting a status

D General
The status message can be selected wth the programmed
text, and the message text s also dsplayed on the functon
dsplay of the called staton.
Up to 24 status types (1 to 24) are avalable, and the status
messages 22 and 24 have desgnated meanngs.
Status 22: Emergency*
Status 24: GPS request
* The status 22 can also be used as a normal status message
by dsablng the desgnated meanng. However, the status 24 s
fixed.
The status call can be sent wth both ndvdual and group
calls.
9
D Transmitting a status
q Durng stand-by operaton, push [BIIS Button], then push
[CH Up] or [CH Down] to select the desred staton/group
code.
w Push [BIIS Button] agan, then push [CH Up] or [CH Down]
to select the desred status message.
Or, you can select the desred status message usng
[Status Up]/[Status Down] key drectly.
STATUS 01
TX Status 01
CALL BIIS
Status message is displayed.
e Push [Call] or [PTT]* to transmt the status message to
the selected staton/group.
* PTT call can be made only when PTT call capablty s permt-
ted.
• 2 beeps wll sound and the transcever returns to stand-by op-
eraton automatcally when the transmsson s successful.
TXC TXCE