Icom IC-F3160 SERIES Operating Manual page 35

D Transmitting a Revive Call
A Revve call allows you to send a sgnal that wll revve the
(stunned) staton.
q Push [Digital Button] to enter the applcaton selecton
mode.
• "VOICE" appears.
• To change the call type, push and hold [Digital Button] for 1
sec. durng stand-by operaton. After changng, the transcever
enters the applcaton selecton mode automatcally.
w Push [CH Up] or [CH Down] to select "REVIVE."
e Push [Digital Button] agan to enter the Indvdual ID se-
lecton mode.
• The pre-programmed ID name s dsplayed.
• When ID name s not programmed, ID code s dsplayed.
r Push [CH Up] or [CH Down] to select the desred ID
name (or ID code).
• Dependng on the pre-settng, you can nput the ID drectly.
(10-key verson only) See p. 39 for detals.
Individual ID name
is displayed.
REVIVE
STATION 1
DIGI STUP STDN
t Push [PTT] to transmt the Revve call to the selected sta-
ton.
• "REV TX" s dsplayed.
y Release [PTT].
• "REV ACK" s dsplayed after recevng an acknowledgement
from the targeted staton.
• "REV FAIL" s dsplayed f the (stunned) staton does not re-
ceve the sgnal or send back an acknowledgement.
u After a specfied tme perod has passed, the transcever
wll return to receve.
5
IDAS OPERATION
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
32