Preparation; Programmable FunctOn Keys - Icom IC-F3160 SERIES Operating Manual

1

PREPARATION

■ Programmable function keys
The followng functons can be assgned to [EMR], [Side1],
[Side2], [Side3], [P0], [P1], [P2] and [P3] programmable
functon keys.
Consult your Icom dealer or system operator for detals con-
cernng your transcevers programmng.
If the programmable functon names are bracketed n the fol-
lowng explanatons, the specfic key s used to actvate the
functon depends on the programmng.
D For BIIS 1200 operation only
BIIS BUTTON KEY "BIIS"
➥ Push to toggle the call ID lst, transmt message and
stand-by operaton.
➥ Push to toggle between queue channel and receved mes-
sage record ndcaton after queue channel s selected.
➥ Push and hold for 1 sec. to select queue channel ndca-
ton.
STATUS UP/DOWN KEYS "STUP"/"STDN"
➥ Durng stand-by operaton, push to dsplay the transmt
status ndcaton and select a status number.
➥ When a receved SDM (Short Data Message) s dsplayed,
push to cancel the automatc scroll and scroll the mes-
sage manually.
➥ When an SDM that contans more than 12 characters s
dsplayed, push to scroll the message manually.
1
D For MDC 1200 system operation only
MDC CALL KEY "CALL"
➥ Push to enter the MDC menu selecton mode. Then select
the desred MDC menu from "SELCALL," "CALALERT,"
"STUN," "REVIVE," "RADIOCHK," "STATUS," "MSG" and
"CALL LOG" usng [CH Up] or [CH Down].
After selecton, push ths key agan to enter the transcev-
er alas selecton mode.
• No operaton s performed for about 15 sec., the transcever
returns to the normal operaton condton.
➥ Whle n the transcever alas selecton mode, push to
return to the MDC menu selecton mode.
MDC SELCALL KEY "SC"
Push to enter the transcever alas selecton mode for
SelCall.
• After the desred alas selecton, push [PTT] to transmt a SelCall.
• No operaton s performed for about 15 sec., the transcever
returns to the normal operaton condton.
MDC CALLALERT KEY "CA"
Push to enter the transcever alas selecton mode for
CallAlert.
• After the desred alas selecton, push [PTT] to transmt a Call
Alert.
• No operaton s performed for about 15 sec., the transcever
returns to the normal operaton condton.