Icom IC-F3160 SERIES Operating Manual page 21

D Transmitting a Stun Call
Stun call allows you to send MDC 1200 system sgnal that
wll stun the targeted staton.
q Push [MDC Call] to enter the MDC menu selecton mode.
w Select "STUN" usng [CH Up] or [CH Down].
STUN
CALL SC
e Push [MDC Call] agan to enter the transcever alas se-
lecton mode.
r Select the desred alas usng [CH Up] or [CH Down].
t Push [PTT] to transmt the stun call to the selected sta-
ton.
• "STN TX" s dsplayed.
y Release [PTT].
• "STN ACK" s dsplayed after recevng an acknowledgement
from the targeted staton.
• "STN FAIL" s dsplayed f the targeted staton does not receve
the sgnal or send back an acknowledgement.
u After a specfied tme perod has passed, the transcever
wll return to receve.
CA
MDC 1200 SYSTEM OPERATION
D Transmitting a Revive Call
Revve call allows you to send MDC 1200 system sgnals
that wll revve the targeted (stunned) staton.
q Push [MDC Call] to enter the MDC menu selecton mode.
w Select "REVIVE" usng [CH Up] or [CH Down].
REVIVE
CALL SC
e Push [MDC Call] agan to enter the transcever alas se-
lecton mode.
r Select the desred alas usng [CH Up] or [CH Down].
t Push [PTT] to transmt the revve call to the selected sta-
ton.
• "REV TX" s dsplayed.
y Release [PTT].
• "REV ACK" s dsplayed after recevng an acknowledgement
from the targeted staton.
• "REV FAIL" s dsplayed f the targeted staton does not receve
the sgnal or send back an acknowledgement.
u After a specfied tme perod has passed, the transcever
wll return to receve.
3
CA
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
18