Related Manuals for Icom IC-F4160DS
Summary of Contents for Icom IC-F4160DS
- Page 1 OPERATING GUIDE OPERATING GUIDE FOR IC-F3162DT/DS IC-F4160DT/DS BIIS 1200/dPMR OPERATION...
- Page 2 • IC-F4162DT/DS uhf d pmr mobile transceiver Icom, Icom Inc. and the Icom logo are registered trademarks of Icom Incor- porated (Japan) in Japan, the United States, the United Kingdom, Germany, France, Spain, Russia and/or other countries.
-
Page 3: Table Of Contents
TABLE OF CONTENTS IMPORTANT ................i 3 dPMR OPERATION ..........13–27 TABLE OF CONTENTS ............ii ■ dPMR operation ............13 ■ dPMR display .............13 1 PREPARATION............1–2 ■ Receiving a call ............13 ■ Programmable function keys ........1 ■ Transmitting a call ............18 2 BIIS 1200 OPERATION ..........3–12 ■... -
Page 4: Preparation
The following key functions are required for dPMR operation. function keys. dPMR BUTTON “dPMR” Consult your Icom dealer or system operator for details con- ➥ Push to enter the ID selection mode. cerning your transceiver’s programmed keys and their func- •... -
Page 5: Preparation
PREPARATION D For both BIIS 1200 and dPMR operations D Additional key functions The following key functions are useful for BIIS 1200 and dPMR • For both BIIS 1200 and dPMR operations operations. The following key functions are recommended for BIIS 1200 and dPMR operations, and function as described below. -
Page 6: Biis 1200 Operation
BIIS 1200 OPERATION ■ BIIS 1200 operation ■ Receiving a call D Receiving an Individual call The Binary Interchange of Information and Signalling (BIIS) 1200 standard is the best choice to add a data service to an q When an Individual call is received: existing system. -
Page 7: D Receiving A Group Call
BIIS 1200 OPERATION D Receiving a Group call D Receiving an Emergency call q When a Group call is received: q When an Emergency call is received: • Rings sound. • Rings sound. • “ ” appears and the mute is released. •... -
Page 8: D Receiving A Status Message
BIIS 1200 OPERATION ■ Receiving a call (continued) D Receiving an SDM D Receiving a status message q When a status message is received: q When an SDM is received: • Rings sound. • Rings sound. • The calling station’s ID (or name) and the SDM blink. •... - Page 9 BIIS 1200 OPERATION D Displaying a received call record D Displaying a received message — Queue channel mode The transceiver memorizes up to six received messages. The transceiver memorizes up to three calling station’s IDs. When the seventh message is received, the oldest mes- When the fourth call is received, the oldest call record will be sage will be removed, and the last received message will be removed, and the last received call will be added.
-
Page 10: Transmitting A Call
BIIS 1200 OPERATION ■ Transmitting a call D Transmitting an Individual or Group call NOTE: If you want to make a call to the pre-programmed D General ID, skip step q and w then directly go to step e. • Editing an ID q Push [BIIS Button] to enter the call code memory mode. - Page 11 BIIS 1200 OPERATION D Transmitting a status message q Push [BIIS Button] to enter the call code memory mode. You can send a pre-programmed status message to an indi- vidual station or to group stations. • “ ” appears. There are 24 status messages that can be sent, and Status •...
-
Page 12: D Transmitting An Sdm
BIIS 1200 OPERATION ■ Transmitting a call (continued) D Direct message input D Transmitting an SDM (Only 10-key version) You can send a pre-programmed SDM to an individual station While displaying an SDM, you can edit or change the mes- sage. - Page 13 BIIS 1200 OPERATION D Transmitting an Emergency call • Usable characters If an MSK channel is used as the Emergency channel, the transceiver can access the BIIS emergency mode. Characters If your transceiver is programmed for Silent operation, you ’ ” , : _ ( ) <...
-
Page 14: Position Data Transmission
BIIS 1200 OPERATION ■ Position data transmission ■ Stun function When a GPS receiver is connected to the transceiver, through If a call is received with a specified ID, set as the killer ID, the the OPC-966 ,* the position data (longitude stun function is activated and the transceiver is disabled. -
Page 15: Printer Connection
BIIS 1200 OPERATION ■ Printer connection When a printer is connected to the transceiver, through the OPC-966 , received SDM and the calling interface cable station’s ID can be printed out, depending on the pre-pro- grammed settings. Ask your dealer or system operator for connection and set- ting details. -
Page 16: Dpmr Operation
dPMR OPERATION ■ dPMR operation ■ Receiving a call D Receiving an Individual call The IC-F3162DT/IC-F3162DS and IC-F4162DT/IC-F4162DS provide digital Private Mobile Radio (dPMR) operation that q When an Individual call is received: meets the 6.25 kHz bandwidth requirements for narrow band •... - Page 17 dPMR OPERATION D Receiving a Group call D Receiving a status message q When a status message is received: q When a Group call is received: • Rings sound. • Rings sound. • The calling station’s ID (or name) and the status message •...
- Page 18 dPMR OPERATION ■ Receiving a call (continued) D Receiving a Stun, Kill or Revive call D Receiving an SDM q When an SDM is received: If an Individual call with a Stun or Kill command is received from a specified station, the transceiver will display “SORRY,” •...
- Page 19 dPMR OPERATION D Receiving an Ambience Listening call D Talk back function If an Individual call with an Ambience Listening command is The Talk Back function allows you to select the same call received from a specified station, the transceiver will auto- mode (Analog or Digital) as the received call.
- Page 20 dPMR OPERATION ■ Receiving a call (continued) D Displaying a received call log entry NOTE: Depending on the pre-programmed settings, push- Depending on the pre-programmed setting, the transceiver ing [Call] while displaying a call log entry makes a Voice stores up to 10 call log entries. Individual Voice, Status and SDM call log entries are stored.
-
Page 21: Transmitting A Call
dPMR OPERATION ■ Transmitting a call • When no acknowledgement is received dPMR operation allows you to make a call to a specific sta- After making a call, the transceiver waits for an acknowledge- tion (Individual call) or to a particular group (Talkgroup call). ment for the pre-programmed time period. - Page 22 dPMR OPERATION ■ Transmitting a call (continued) D Transmitting a Status Polling Call D Transmitting a Voice Call NOTE: If you want to make a call to the pre-programmed The transceiver can send a signal that causes the target sta- tion to automatically transmit its current status.
- Page 23 dPMR OPERATION D Transmitting a status message You can send a pre-programmed status message to an indi- y Push [Call] to transmit the status message to the selected vidual station or to group stations. station or talkgroup. There are 32 status messages that can be sent. •...
-
Page 24: D Transmitting An Sdm
dPMR OPERATION ■ Transmitting a call (continued) D Transmitting an SDM You can send a pre-programmed SDM to an individual station u Push [Call] to transmit the SDM to the selected station or or to group stations. talkgroup. The transceiver has 10 memories to store messages. •... - Page 25 dPMR OPERATION D Direct message input (Only 10-key version) • Usable characters While displaying an SDM, you can edit or change the mes- sage. Characters ’ ” , : _ ( ) < > q Push [dPMR Button] twice to enter the application selec- (space) # �...
- Page 26 dPMR OPERATION ■ Transmitting a call (continued) D Transmitting an Emergency call If a digital channel is used as the Emergency channel, the r After the Emergency call cycles have ended, the trans- transceiver can access the dPMR emergency mode. ceiver automatically returns to the stand-by mode.
-
Page 27: Transmitting A Command
dPMR OPERATION ■ Transmitting a command D Transmitting a Stun Call The following Individual calls allow you to send special com- mands. These calls will function if you are designated as a A Stun call allows you to send a command that will stun the specific station. - Page 28 dPMR OPERATION ■ Transmitting a command (continued) D Transmitting a Revive Call D Transmitting a Kill Call A Kill call allows you to send a command that will disable the A Revive call allows you to send a command that will revive the (stunned) station.
-
Page 29: Position Data Transmission
dPMR OPERATION ■ Position data transmission ■ Status message transmission When a GPS receiver is connected to the transceiver, through Status messages can be automatically transmitted: the OPC-966 ,* the position data (longitude • When the transceiver is turned ON or OFF. interface cable and latitude) can be automatically transmitted. -
Page 30: Printer Connection
dPMR OPERATION ■ Printer connection When a printer is connected to the transceiver, through the OPC-966 , received SDM and the calling interface cable station’s ID can be printed out, depending on the pre-pro- grammed settings. Ask your dealer or system operator for connection and set- ting details. - Page 31 MEMO...
- Page 32 A-6842-2EU 1-1-32 Kamiminami, Hirano-ku, Osaka 547-0003, Japan © 2010 Icom Inc.