Message Operation; D Entering A Tx Message; D Transmitting A Message; D Deleting A Tx Message - Icom IC-9700 Advanced Manual

10. D-STAR OPERATION (ADVANCED)

Message operation

You can save up to 5 short messages in the
transceiver's memory to transmit in the DV mode.
Each message can be up to 20 characters.

D Entering a TX message

Example: Entering "JAPAN TOM" into TX message
memory number 1.
1. Open the TX MESSAGE (DV) screen.
» SET > My Station > TX Message (DV)
MENU
2. Touch a TX message memory number for 1 second.
3. Touch "Edit."
4. Enter a message of up to 20 characters, then
touch [ENT].
Selectable characters and symbols
A to Z, a to z, 0 to 9, ! " # $ % & ' ( ) * +
, - . / : ; < = > ? @ [ \ ] ^ _ ` { | } ˜ (space)
• Returns to the TX MESSAGE screen.
5. To close the TX MESSAGE (DV) screen, push
.
EXIT

D Transmitting a message

You can transmit a preset TX message by pushing
[PTT] in the DV mode. First, select a TX message
which also turns ON the Message Transmission
function.
1. Open the TX MESSAGE (DV) screen.
» SET > My Station > TX Message (DV)
MENU
2. Touch a TX message memory number.
L To not transmit any message, select "OFF."
3. To close the TX MESSAGE (DV) screen, push
.
EXIT
Information
L
• The message is transmitted with your voice signal.
• The message is transmitted each time you transmit.
• When continuously transmitting, the selected TX
message is transmitted every 30 seconds.

D Deleting a TX message

You can delete the TX messages.
» SET > My Station > TX Message (DV)
MENU
Example: Deleting TX message "JAPAN TOM" from
TX message memory number 1.
1. Push .
MENU
2. Touch a TX message memory number for 1 second.
3. Select "Clear."
• The confirmation dialog is displayed.
4. Touch <YES>.
• Clears the entered message.
LTo exit the MENU screen, push
10-14
MENU .