Lacp Configuration - Planet WGSW-24040 User Manual

4.5.2 LACP Configuration

Link Aggregation Control Protocol (LACP) - LACP LAG negotiate Aggregated Port links with other LACP ports located on a
different device. LACP allows switches connected to each other to discover automatically whether any ports are member of the
same LAG.
This page allows the user to inspect the current LACP port configurations, and possibly change them as well. The LACP port
settings relate to the currently selected stack unit, as reflected by the page header. The LACP Port Configuration screen in
Figure 4-5-4 appears.
The page includes the following fields:
Object
•
Port
•
LACP Enabled
•
Key
•
Role
Figure 4-5-4 LACP Port Configuration page screenshot
Description
The switch port number.
Controls whether LACP is enabled on this switch port. LACP will form an
aggregation when 2 or more ports are connected to the same partner. LACP can
form max 12 LLAGs per switch and 2 GLAGs per stack.
The Key value incurred by the port, range 1-65535 . The Auto setting will set the
key as appropriate by the physical link speed, 10Mb = 1, 100Mb = 2, 1Gb = 3.
Using the Specific setting, a user-defined value can be entered. Ports with the
same Key value can participate in the same aggregation group, while ports with
different keys cannot.
The default setting is "Auto"
The Role shows the LACP activity status. The Active will transmit LACP packets
User's Manual of WGSW-24040 / WGSW-24040R
88
SGSW-24040 / SGSW-24040R