Vlan Membership Configuration - Planet WGSW-24040 User Manual

4.6.5 VLAN Membership Configuration

Adding Static Members to VLANs (VLAN Index)
Use the VLAN Static Table to configure port members for the selected VLAN index. Assign ports as tagged if they are connected
to 802.1Q VLAN compliant devices, or untagged they are not connected to any VLAN-aware devices.
The VLAN membership configuration for the selected stack switch unit switch can be monitored and modified here. Up to 64
VLANs are supported. This page allows for adding and deleting VLANs as well as adding and deleting port members of each
VLAN. The VLAN Membership Configuration screen in
The page includes the following fields:
Object
•
Delete
•
VLAN ID
•
Port Members
•
Adding a New VLAN
Figure 4-6-3
Figure 4-6-3 VLAN Membership Configuration page screenshot
Description
To delete a VLAN entry, check this box.
The entry will be deleted on all stack switch units during the next Save.
Indicates the ID of this particular VLAN.
A row of check boxes for each port is displayed for each VLAN ID. To include a
port in a VLAN, check the box. To remove or exclude the port from the VLAN,
make sure the box is unchecked. By default, no ports are members, and all
boxes are unchecked.
Click to add a new VLAN ID. An empty row is added to the table, and the VLAN
can be configured as needed. Legal values for a VLAN ID are 1 through 4095.
The VLAN is enabled on the selected stack switch unit when you click on "Save".
The VLAN is thereafter present on the other stack switch units, but with no port
members.
A VLAN without any port members on any stack unit will be deleted when you
click "Save".
The button can be used to undo the addition of new VLANs.
User's Manual of WGSW-24040 / WGSW-24040R
appears.
102
SGSW-24040 / SGSW-24040R