Ip Configuration - Planet WGSW-24040 User Manual

4.2.2 IP Configuration

The IP Configuration includes the IP Address, Subnet Mask and Gateway. The Configured column is used to view or change the
IP configuration.Fill up the IP Address, Subnet Mask and Gateway for the device. The screen in
The Current column is used to show the active IP configuration.
Object
•
DHCP Client
•
IP Address
•
IP Mask
•
IP Router
•
SNTP Server
•
VLAN ID
• Timezone Offset
Buttons
Figure 4-2-2 IP Configuration page screenshot
Description
Enable the DHCP client by checking this box. If DHCP fails and the configured IP
address is zero, DHCP will retry. If DHCP fails and the configured IP address is
non-zero, DHCP will stop and the configured IP settings will be used. The DHCP
client will announce the configured System Name as hostname to provide DNS
lookup.
Provide the IP address of this switch in dotted decimal notation.
Provide the IP mask of this switch dotted decimal notation.
Provide the IP address of the router in dotted decimal notation.
Provide the IP address of the SNTP Server in dotted decimal notation.
Provide the managed VLAN ID. The allowed range is 1 through 4095.
Provide the timezone offset relative to UTC/GMT.
The offset is given in minutes east of GMT. The valid range is from -720 to 720
minutes.
50
User's Manual of WGSW-24040 / WGSW-24040R
SGSW-24040 / SGSW-24040R
Figure 4-2-2 appears.