4.9.2 IGMP Snooping Configuration
This page provides IGMP Snooping related configuration.
Most of the settings are global, whereas the Router Port configuration is related to the currently selected stack unit, as reflected
by the page header.
The IGMP Snooping Configuration screen in
The page includes the following fields:
Object
•
Snooping Enabled
•
Unregistered IPMC
Flooding enabled
•
VLAN ID
•
IGMP Snooping
Enabled
•
IGMP Querier
Figure 4-9-5
appears.
Figure 4-9-5 IGMP Snooping Configuration page screenshot
Description
Enable the Global IGMP Snooping.
Enable unregistered IPMC traffic flooding.
The VLAN ID of the entry.
Enable the per-VLAN IGMP Snooping.
Enable the IGMP Querier in the VLAN. The Querier will send out if no Querier
received in 255 seconds after IGMP Querier Enabled. Each Querier's interval is
125 second, and it will stop act as an IGMP Querier if received any Querier from
other devices.
User's Manual of WGSW-24040 / WGSW-24040R
136
SGSW-24040 / SGSW-24040R