Snmpv3 Groups Configuration - Planet WGSW-24040 User Manual

•
Community
•
Source IP
•
Source Mask

4.3.5.3 SNMPv3 Groups Configuration

Configure SNMPv3 groups table on this page. The entry index key are Security Model and Security Name.
The SNMPv3 Groups Configuration screen in
The page includes the following fields:
Object
•
Delete
•
Security Model
•
Security Name
•
Group Name
Indicates the community access string to permit access to SNMPv3 agent. The
allowed string length is 1 to 32, and the allowed content is the ASCII characters
from 33 to 126.
Indicates the SNMP access source address.
Indicates the SNMP access source address mask.
Figure 4-3-6
Figure 4-3-6 SNMPv3 Groups Configuration page screenshot
Description
Check to delete the entry. It will be deleted during the next save.
Indicates the security model that this entry should belong to. Possible security
models are:
• v1: Reserved for SNMPv1.
• v2c: Reserved for SNMPv2c.
• usm: User-based Security Model (USM).
A string identifying the security name that this entry should belong to.
The allowed string length is 1 to 32, and the allowed content is the ASCII
characters from 33 to 126.
A string identifying the group name that this entry should belong to.
The allowed string length is 1 to 32, and the allowed content is the ASCII
characters from 33 to 126.
User's Manual of WGSW-24040 / WGSW-24040R
appears.
71
SGSW-24040 / SGSW-24040R