•
Type Value
•
Traffic Class
•
Modification Buttons
4.8.2.1 QoS Control Entry Configuration
Configure a new QoS Control Entry on this page.
Frames can be classified by up to 4 different QoS classes: Low, Normal, Medium, and High.
The classification is controlled by a QCL assigned to each port.
A QCL consists of an ordered list of up to 12 QCEs.
Each QCE can be used to classify certain frames to a specific QoS Class.
This classification can be based on parameters such as VLAN ID, UDP/TCP port, IPv4/IPv6 DSCP or Tag Priority.
Frames not matching any of the QCEs are classified to the default QoS Class for the port.
The QCE Configuration screen in
Indicates the value according to its QCE type.
•
Ethernet Type: The field shows the Ethernet Type value.
•
VLAN ID: The field shows the VLAN ID.
•
TCP/UDP Port: The field shows the TCP/UDP port range.
DSCP: The field shows the IPv4/IPv6 DSCP value.
•
The QoS class associated with the QCE.
You can modify each QCE in the table using the following buttons:
: Inserts a new QCE before the current row.
: Edits the QCE.
: Moves the QCE up the list.
: Moves the QCE down the list.
: Deletes the QCE.
: The lowest plus sign adds a new entry at the bottom of the list of QCL.
Figure 4-8-2
appears.
Figure 4-8-2 QCE Configuration page screenshot
User's Manual of WGSW-24040 / WGSW-24040R
120
SGSW-24040 / SGSW-24040R