Transmit Records To Host; Batch Mode Transmit Delay; Multiple Scanner Operation - Honeywell Xenon 1900 User Manual

Transmit Records to Host

If you are operating in Inventory Batch Mode (see
page 3-15), you must scan the following bar code to transmit all the stored
data to the host system.

Batch Mode Transmit Delay

Sometimes when accumulated scans are sent to the host system, the
transmission of those scans is too fast for the application to process. To
program a transmit delay between accumulated scans, scan one of the fol-
lowing delays. Default = Off.
Note: In most cases, a short (250 ms (milliseconds) delay is ideal; however,
longer delays may be programmed. Contact Technical Support
(page
* Batch Mode Transmit Delay Off
(No Delay)
Batch Mode Transmit Delay Medium

Multiple Scanner Operation

Note: Multiple Scanner Operation Mode allows you to link up to 7 scanners to
one base. You cannot join an 8th scanner until you unlink one of the 7
scanners or take a scanner out of range.
Transmit Inventory Records
14-3) for additional information.
(500 ms)
Inventory Batch Mode
Batch Mode Transmit Delay Short
(250 ms)
Batch Mode Transmit Delay Long
(1000 ms)
on
3 - 19