Base Power Communication Indicator; Reset Scanner; Scanning While In Base Cradle - Honeywell Xenon 1900 User Manual

Base Power Communication Indicator

To display the power indicator on the base, scan the Base Power Commu-
nication Indicator On bar code. To turn off the power indicator, scan the Off
bar code. Default = On .
* Base Power Communication
Indicator On

Reset Scanner

Scanning this bar code causes the scanner to re-link with the base.

Scanning while in Base Cradle

If you want to be able to scan bar codes while the scanner is in the base cradle,
scan the Scanning in Cradle on bar code below. If you want to only allow scan-
ning when the scanner is out of the base cradle, scan Scanning in Cradle Off.
Default = Scanning in Cradle Off .
* Scanning in Cradle Off
Reset Scanner
Base Power Communication
Indicator Off
Scanning in Cradle On
3 - 7