Ncr Bioptic Aux Port Configuration; Wincor Nixdorf Terminal Default Settings - Honeywell Xenon 1900 User Manual

NCR Bioptic Aux Port Configuration

Scan the following Plug and Play code to program the scanner for an NCR
bioptic scanner auxiliary port configuration. The following prefixes are pro-
grammed for each symbology:
Symbology
UPC-A
UPC-E
EAN-8
EAN-13

Wincor Nixdorf Terminal Default Settings

Scan the following Plug and Play code to program the scanner for a Wincor
Nixdorf terminal. This bar code sets the baud rate to 9600 bps and the
data format to 8 data bits, no parity, 1 stop bit.
2 - 8
Prefix
A
E0
FF
F
NCR Bioptic Settings
Wincor Nixdorf Terminal Settings
Symbology
Code 39
Interleaved 2 of 5
All other bar
codes
Prefix
B1
B2
B3