Wall Mounting - Fortinet FON-600 User Manual

3. Connect one end of the short line cord to the FortiVoice or wall jack
and connect the other end of the short line cord to the TO LINE jack of
the cord adapter.
4. Connect one end of the long line cord to the TO PHONE jack of the cord
adapter and connect the other end to the TEL LINE jack of telephone.
You must use the long cord provided with your phone. Alternatively, the
FON-600 can be powered through building wiring. See
page 23

Wall mounting

1. Turn the phone over so that you are looking at the bottom of the
phone. Insert tabs at the narrow end of the wall-mount bracket into the
holes at the rear of the phone bottom. Press and latch the tabs at the
thicker end of the wall bracket into holes at the front end of phone. The
bracket has two round plastic holes that can be used to hang your
phone on the wallplate on your wall.
If you do not wish to mount your phone on the wall, the wall mount bracket
can be reversed to raise the angle of the phone's display when sitting on a
table or desk.
Installing your phone
for further details.
Page 4
"Appendix A" on
FON-600 Telephone User Guide