Troubleshooting - Epson Stylus CX1500 ME100 Service Manual

EPSON Stylus CX1500/ME100

3.3 Troubleshooting

You can identify the troubles by using the checklist in this section after confirming the LED indication on the SPC. If you connect the SPC to your PC and see an error message on
the STM3, you can short the total repair time. And, when you find out the defective parts, replace them by referring the Chapter 4 "Disassembly". The following tables describe the
error check points.
Occurrence
timing Detailed phenomenon
CR position
• Power on
When turning on the power, the SPC
does not operate at all.
• Anywhere
TROUBLESHOOTING
Table 3-4. Check point for the communication error according to each phenomenon
Defective
unit/part name
1. Check if the Panel Connector Cable is not damaged.
Panel Unit
2. Check if the Panel Board is not damaged.
Troubleshooting
Check point
Panel Board
Panel Connector Cable
Revision A
Remedy
1. Replace the Panel Board with a new one.
2. Replace the Panel Board with a new one.
52