Epson Stylus CX1500 ME100 Service Manual page 107

EPSON Stylus CX1500/ME100
V When assembling Printer mechanism to Housing Lower (Inner),
T
On this models, the assembled accuracy of each part
composed of Printer mechanism is based on Housing Lower
(Inner).
To ensure the assembled accuracy, you have to control the
assembled standard position of main frame against X/Y/Z-
axis direction as the following figure.
[X-axis direction]
•
Make sure that main frame is correctly placed on the groove
of Housing Lower (Inner).
•
Make sure that there is no gap between main frame and
Housing Lower (Inner).
[Y-axis direction]
•
Make sure that cut-out portion of main frame is correctly
placed on the square protrusion of Housing Lower (Inner).
[Z-axis direction]
•
Make sure that there is no gap between main frame and
Housing Lower (Inner).
•
Make sure that the left side of Printer mechanism is
correctly fixed by one hook.
Figure 4-51. Assembled standard position of main frame
DISASSEMBLY AND ASSEMBLY
Assembled standard position of
X-axis direction of main frame
Assembled standard position of
Y-axis direction of main frame
Assembled standard position of
Z-axis direction of main frame
When having replaced Printer Mechanism, implement the following
A D J U S T M E N T
R E Q U I R E D
adjustment. (Refer to Chapter 5 "ADJUSTMENT")
1. Initial ink charge
2. Head ID input
3. Top margin adjustment
4. Bi-D adjustment
Disassembly
Revision A
107