Epson Stylus CX1500 ME100 Service Manual page 88

EPSON Stylus CX1500/ME100
Insert the rib (x1, ) of Main Board Unit into Main Frame, and let
it ride on the rib (x1,
Figure 4-19. Installation of Main Board Unit
When having replaced Main Board Unit, implement the adjustment
A D J U S T M E N T
R E Q U I R E D
in the following order. (Refer to Chapter 5 "ADJUSTMENT")
T
[When possible to read data from the old board]
1. EEPROM parameter back up
T
[When impossible to read from the old board]
1. EEPROM initial setting
2. Protection counter reset
3. Head ID input
4. Top margin adjustment
5. Bi-D adjustment
6. USB ID input
DISASSEMBLY AND ASSEMBLY
) of Main Frame.
Rib
Disassembly
Revision A
88