Waste Ink Pads - Epson Stylus CX1500 ME100 Service Manual

EPSON Stylus CX1500/ME100

4.3.18 Waste Ink Pads

V External View
Waste Ink Pads
Figure 4-47. Waste Ink Pads Removal
DISASSEMBLY AND ASSEMBLY
V Part/Unit that should be removed before removing Waste Ink Pads.
Document Cover / Panel Unit / Panel Housing / Scanner Unit / Housing Upper /
Main Board Unit / Housing Middle / ASF Unit
V Removal procedure
1. Remove Waste Ink Pads (x4) and Tube Stopper.
When assembling Waste Ink Pads, be sure to set the tip of Ink Tube
in the correct position of Housing Lower (Inner). Otherwise it will
cause ink leakage.
When having replaced Waste Ink Pads, implement the following
A D J U S T M E N T
R E Q U I R E D
adjustment. (Refer to Chapter 5 "ADJUSTMENT")
T
Protection counter reset
Disassembly
Figure 4-48. Tip of Ink Tube setting position
Revision A
105