Housing Lower (Outer) - Epson Stylus CX1500 ME100 Service Manual

EPSON Stylus CX1500/ME100

4.3.10 Housing Lower (Outer)

V External View
1
Dowel
5
Spur Gear 60
1
Housing Lower Housing Lower
(Inner) (Outer)
Figure 4-25. Housing Lower (Outer) Removal
DISASSEMBLY AND ASSEMBLY
2
C.P.F 3x8 TBD
(4±1kgfcm)
Dowel
Dowel
4
Interference
V Part/Unit that should be removed before removing Housing Lower (Outer).
Document Cover / Stacker / Panel Unit / Panel Housing / Scanner Unit / Housing
Upper / Main Board Unit / Housing Middle
V Removal procedure
1. Remove the screws (x5,
Tighten the screws in order as shown in the figure.
2. As shown in the steps of the figure, lift Housing Lower (Inner) together with
the Printer Mechanism while avoiding interference at the right rear side, and
separate Housing Lower (Outer).
Do not damage Spur Gear 60 of EJ Roller when removing/installing
C A U T I O N
the screw (
Align the positioning holes (x3) of Housing Lower (Inner) with the
dowels (x3,
3
2
Disassembly
) for securing Housing Lower (Outer).
).
5
) of Housing Lower (Outer).
Revision A
92