How To Use This Manual - Siemens HiPath 1100 User Manual

Step by step
q ll
,
CONSULT
2nd CALL
CONSULTINT.
CONSULT?

How to use this manual

The steps for programming the system are presented
sequentially in graphic format under the column "Step
by Step" on the left side of each page.
Meaning of symbols:
d
Press the Flash/Fil key.
n
Lift the handset.
t
Replace the handset.
s
Start conversation.
p
, ... Enter numbers, keys, passwords, internal or external
phone numbers, etc.
Press the programmable key with the LED turned off.
Press the programmable key with the LED turned on.
Press the programmable key with the blinking LED.
w
Wait to hear an audible tone through the handset or
speaker.
<< >>
An extension is calling.
The display shows the available function.
To enable the displayed function, press the key.
Browse all functions available.
Press the navigation keys
until the desired function shows on the display.
Then press the key to confirm your selection.
When enabling certain functions and procedures, a long
beeping tone means the activation was successful.
When enabling certain functions and procedures, short
beeping tones mean the activation failed.
How to use this manual
.
,
.
9