About This Manual; Requirements - Siemens Hicom 150 E User And Installation Manual

About This Manual

Requirements

This manual is intended both for personnel working with the Hicom
Attendant P attendant console who are familiar with the
Windows 95/98 user interface and for the system administrator
who configures and oversees the Hicom Attendant P attendant con-
sole.
The manual contains all the information you will need to install and
operate the Hicom Attendant P attendant console:
z
To make important information easy to find, the first section of
this manual deals with Operating the Hicom Attendant P.
z
The second section describes Installing and Configuring the
Hicom Attendant P.
z
If you run into any problems installing or operating the Hicom
Attendant P , refer to the third section of this manual, Error
Correction in Hicom Attendant P.
You or the system administrator must install the attendant console
hardware and Hicom Attendant P software for the Microsoft Win-
dows 95/98 user interface on your PC (see section two of this man-
ual, Installing and Configuring the Hicom Attendant P).
The PC's power management system must not be activated during
Hicom Attendant P operation.
Operating the program requires some elementary knowledge of
PCs and Windows 95/98.
Introduction
9