Timer For Outgoing External Calls; Timeout For External Calls - Siemens HiPath 1100 User Manual

Functions used for making calls
Step by step
TIME EXCEEDED
40
w s
Wait for the call to be answered. Start conversation.
When the LCR or ACS is activated, the exten-
sions receive a false line tone for external dialing.

Timer for outgoing external calls

This setting specifies a maximum time for the duration
of an outgoing external call for each extension.
The time count starts upon connection of a call and it
never restarts while the call is in progress (e.g., when
there is a transfer). Once the specified time expires, the
call is automatically disconnected.
Required: This feature must have been configured and
activated for the extension.
p
Enter an external number.
w s
Wait for the call to be answered. Start conversation.
w
Timer for the specified time period is initiated.
Before a call is disconnected by the timer, a 10-second
warning tone is sent to the extension and the message
"TIME EXCEEDED" is shown on the display.
t
Once the specified time has elapsed the call is discon-
nected.

Timeout for external calls

The "timeout for external calls" feature defines a time
"credit" for an extension to make external calls. In other
words, when the total time of the external calls made
reaches the time limit set for calls underway, these calls
will be interrupted and no further calls may be made un-
til more time "credit" is awarded.
[1] See Programming an extension - Timer for outgoing external calls,
in the programming manual
[2] See programming manual - Programming the extension - Timeout
for external calls.
1
2