General; Ups Operational Controls; Control Panel - Powerware 9330 Installation & Operation Manual

Operational Controls
and Features

General

8.1
The UPS system should function automatically and require very little attention
during normal operation. The controls and indicators identified in this section are
used during startup, to monitor normal operation and during abnormal events.
Figure 8---1 identifies and shows the location of the controls and indicators on the
Powerware 9330 (10 kVA---20 kVA) UPS and Figure 8---2 identifies and shows the
location of the controls and indicators on the Powerware 9330 (25 kVA---40 kVA)
UPS. The descriptions provide a brief overview of the UPS controls, and standard
and optional features.
NOTE: Read the Operation section of this manual and have thorough knowledge
of UPS operation before attempting to operate any of the UPS controls or
optional components.

UPS Operational Controls

8.2
The UPS has many standard features that provide cost-effective and consistently
reliable power protection:
8.2.1

Control Panel

The Control Panel on the front of the UPS contains an LCD screen to display the
current status of the UPS system. You can view a statistical history and log of
system events and display a real-time graphic representation of power flowing
through the system components. Backlit status indicators show the operating
mode of the UPS and alert you to system events. Soft keys provide navigation
through the information and control screens. The LOAD OFF pushbutton is located
at the top right of the control panel. Below the LOAD OFF pushbutton is the
System Control pushbutton, which provides access to the power control functions of
the UPS. The Control Panel is described in detail in Chapter 9, "Using the Control
Panel".
Powerware 9330 (10 kVA- -40 kVA) Installation and Operation
164201300 Rev. N 013004
8
8--1