Using This Manual; Getting Started 1; Installing The Ups 1 - Powerware 9330 Installation & Operation Manual

•
Parallel System with one to four UPS modules with remote battery and optional
options cabinet
•
Parallel System with one to four UPS modules and integral battery
•
Parallel System with one to four UPS modules, integral battery, and optional
battery cabinet
• Parallel System with one to four UPS modules and remote battery
You can enhance any of these system configurations by adding an optional
accessories, such as a Remote Emergency Power Off (EPO) control, a Remote Monitor
Panel (RMP), and X-Slot t communications connectivity features.

Using This Manual

Your UPS functions automatically and requires very little attention during normal
operation. However, you should read and understand the procedures described in this
manual to ensure trouble-free operation. In particular, you should be thoroughly
familiar with the Remote Emergency Power Off procedure described in Chapter 10 of
this manual.
The information in this manual is divided into the sections and chapters listed.
The system you are installing dictates which parts of this manual you should read.
Everyone should read, at a minimum, the Introduction, Chapters 1, 2, 8, 9, and 10.
Introduction
The Introduction provides a brief description of the UPS system, a description of the
content of each chapter, safety, text conventions used in the manual and reference
information.
Section I
• Chapter 1 -- Getting Started -- tells you how to prepare your site for the
installation of your UPS system. It discusses equipment environmental
requirements, inspecting, and unpacking cabinets.
•
Chapter 2 -- Installing the UPS System -- describes how to install the UPS
cabinets and optional equipment.
•
Chapter 3 -- Installing Batteries -- provides battery safety, installation and
connection information.
• Chapter 4 -- Installing a Remote EPO Control -- contains information for
installing the optional Remote Emergency Power Off (EPO) control.
•
Chapter 5 -- Installing a Remote Monitor Panel -- contains information for
installing the optional Remote Monitor Panel (RMP).
• Chapter 6 -- Installing an Industrial Relay Card -- contains information for
installing the optional Industrial Relay Card (IRC).
Section II
•
Chapter 7 -- Understanding UPS Operation -- provides information on
understanding UPS operation.
Powerware 9330 (10 kVA- -40 kVA) Installation and Operation
164201300 Rev. N 013004
xv