Table of Contents
Advertisement
Proof and Hold
Printing the
Remaining
Copies of Proof
and Hold Jobs
Private Print
To print using Private Print, follow these steps:
3 Otherwise, press the
4 After the menu for specifying the number of print copies appears, press the
appears.
Delete
5 Press the
ENTER
key to delete the job.
1 Access the Job Settings dialog box as indicated in the instructions for
109. Select
Proof and Hold
2 Name the job for future reference when printing from the print operator panel.
If you select
Application Defined
•
the document.
In the
Job Name
•
up to 31 characters in length.
3 Click
OK
.
When printing a Proof and Hold job of multiple copies, only the first copy is printed and the
remaining copies are saved. Follow the steps below after proofing the first copy.
You can print the remaining copies of
Printing Additional Copies of Quick Copy Jobs
operator panel to proceed. When using the
displayed will be one less than the total due to the existing proof copy. The printed jobs will
remain saved on the hard disk until the printer is turned off. To delete jobs manually, use the
same key operations as explained in
Private Print jobs are saved to the hard disk for printing until a four-digit access code is
entered.
The saved jobs are deleted as soon as they are printed.
1 Access the
Job Settings
page 109. Select
Private Print
2 Enter four digits with any numbers between 0 and 9 for the
When you want to print a saved job, enter the access code on the printer operator panel.
or
key until the correct name appears.
.
in
Job Name,
area, select
Custom
to enter a name of your choice. The name can be
Proof and Hold
on page 110. Use the keys on the printer
Proof and Hold option
Deleting Quick Copy Jobs
dialog box as indicated in the instructions for
.
111
Using Optional Equipment
Quick Copy
the application automatically names
jobs following the same steps as for
, the number of copies
on page 110.
Quick Copy
Access Code
.
key once.
on page
on
Hide quick links:
Advertisement
Table of Contents
