Punch - Kyocera Extended Driver User Manual

Punch

N
OTE
Using the Punch
4 Set either Finisher (Face-down)
enable the check box in the
Offset
5 Click OK to return to the
After the first set is delivered, the second set will be delivered offset to the side. Then the
printer delivers the third set in the same position as the first and the fourth set in the same
position as the second.
The feature inserts holes in each printed page.
Punch
The Punch feature is available on printers with supported optional finisher installed.
After installing the printer driver, optional equipment must be selected in the driver in order to
use the punch option (device settings). For further details, refer to
on page 30.
Punch and Booklet Printing
1 In the dialog box, click the
Properties
2 Select either
Finisher (Face-down)
or Finisher (Face-up)
Finishing Options
Print dialog box, and click
cannot be used simultaneously.
tab.
Output
or
Finisher (Face-up)
92
as the output destination, then
section.
OK to start printing.
Installing Optional Devices
as Output destination.