Kyocera Extended Driver User Manual page 73

3 Specify the
right) or to select
counterclockwise from 0 to 360 degrees).
Angle:
•
manually adjusted by placing the mouse pointer on the center or end of the text and
dragging it to the desired position.
•
Manual Adjustment
while dragging the watermark image at left to the desired angle.
• Select User Defined
N
OTE
Angle . Activate the
4 Specify the
separation space between the text.
Enter the number of watermarks in the
•
value.
Enter the value for separation between watermarks in the
•
millimeters or inches in the User Settings dialog box on the Device Settings tab, or use
the box to adjust the value.
5 Click .
OK
Deleting Watermark Text
1 Clear the Disable Feature
Text Angle . Click to select a preset
, which allows you to enter your preferred angle (measured
Angle
Drag the slider horizontally or type the value. The angle of the text can be
: You can select
in the Text Position
Select Rotation around Center of Text
Text Display . Adjust the number of watermarks printed and the amount of
check box on the
69
Diagonal display (slanted to the upper
and hold the left mouse button
Rotate
field and then Angle
check box.
box, or drag the slider to adjust the
Count
Watermark tab.
Printing from Applications
in the Text
Separation box in