Kyocera Extended Driver User Manual page 114

2 In the Job Settings
Copy printing, select
3 You can name the job for later reference when printing from the print operator panel. In
, select
Job Name
Custom to enter a name of your choice. The name can be up to 31 characters.
4 Click OK .
5 When you print from the application, the job will be saved to the hard disk while the
specified number of copies prints.
For further details on printing additional copies of a Quick Copy job, refer to
Additional Copies of Quick Copy Jobs
Printing Additional Copies of Quick Copy Jobs
The actual key operation may differ depending on the model.
N
OTE
1 Press the MENU
2 Press the
3 Press the
4 Press the
5 Press the
ENTER
6 If the user name is correct, press the
correct name appears.
7 Press the ENTER
8 The job name appears with a blinking question mark
If this is the correct job for printing, press the
9 Otherwise, press the
key.
10 Press the
11 Press the ENTER
number of copies.
Deleting Quick Copy Jobs
1 Refer to steps 1 through 8 in
2 If this is the correct job for deletion, press the
dialog box, enable the
.
Quick Copy
Application Defined
on page 110.
key on the printer operator panel.
or key repeatedly until
key to access the submenu.
or key repeatedly until
key. A blinking question mark
ENTER
key. Follow the instructions in the
or key until the correct name appears. Then, press the
or key to specify the number of copies.
key. The Quick Copy job initially printed is printed in the specified
Printing Additional Copies of Quick Copy Jobs
110
Job Storage (e-MPS)
for automatic naming by the application. Or, select
e-MPS > appears.
appears.
>Quick Copy
displays by the user name.
[ ? ]
key. Otherwise, press the
Identification
[ ? ].
key.
ENTER
ENTER key.
check box. For Quick
Printing
or key until the
on page 34 to continue.
ENTER
on page 110.