USB Connection
To install using a USB Connection:
N
OTE
16 Choose from one of the following options:
Select
and click
Yes
•
The
New Printer Installation
Select
to complete the installation and click
No
•
The installation of the printer is now complete. If prompted, restart your system.
This section describes how to install the printer driver when the printer and computer are
connected using a USB connection.
1 Ensure the power for the computer and printer are turned off.
2 Connect the computer and printer using a USB cable. Once connected, power on both
devices.
•
Ensure the printer is ready to print (remove packing materials, insert paper
and any toner or ink cartridges) before connecting the cable.
•
For further details on connecting using a USB cable, refer to the printer's
Operation Guide.
•
If the Welcome to the Found New Hardware Wizard dialog box appears,
click Cancel.
3 Insert the Kyocera Software Library CD-ROM into the CD drive.
to install additional printer drivers.
Next
dialog box appears.
7
.
Finish
Installation