Cover Mode, Page Insert, And Transparency Interleaving; Printing With Covers - Kyocera Extended Driver User Manual

Cover Mode, Page Insert, and Transparency Interleaving

Printing with
Covers
3 Select the Punch check box in the
holes.
4 Click OK to return to the
5 Holes are punched in each printed page.
This section describes the cover mode, page insert, and transparency interleaving features of
the printer driver. When the Cover Mode, Page Insert, and Transparency Interleaving options
are used with the multi-purpose tray, cassette mode (the default setting), must be set. For
further details, refer to the print system's Operation Guide.
Cover Mode: Adds a front or back cover to your document.
•
Inserts blank or printed pages before pages in your document.
Page Insert:
•
Transparency Interleaving:
•
For your document's front cover or front and back covers, you can insert and print on paper
that is a different weight or color than the paper for the body of the document. You can also
specify cover printing when completing booklet printing settings. The paper used for printing
the document body is specified in the
of the cover paper is specified by adjusting settings in the
box. You can also print on the covers.
A duplexer must be connected in order to print using the Front Inside or Back Outside. You
must also specify Print on Both Sides (Duplex)
Although the
Cover Mode
with the Transparency Interleaving
For further details on printing with covers in the booklet printing settings, refer to
Printing on page 102.
1 From the application's
the menu and select
File
2 In the Properties dialog box, click the
Finishing Options
Print dialog box, and click
Inserts a blank or printed page between each transparency.
settings of the
Media
on the
and may be used simultaneously, they cannot be used
Page Insert
option.
dialog box, access the printer
Print
.
Properties
Media tab, and then click
93
Using Optional Equipment
section, and select the number of
OK to begin printing.
dialog box. The source
Properties
Advanced Media Settings
Layout tab.
. Select
Properties
Advanced....
dialog
Booklet
from
Print