Ram Disk Settings - Kyocera Extended Driver User Manual

N
OTE
RAM Disk
Settings
N
OTE
To change RAM Disk setting:
N
OTE
The following functions can be used if a hard disk is installed:
• Quick Copy
• Proof and Hold
• Private Print
• Job Storage
• Temporary Storage
• Permanent Storage
The RAM Disk functions as a hard disk saving print requests into the printer's memory if a
hard disk for printing is not installed. When a hard disk is installed, the RAM Disk function is
inactive.
• Since the RAM Disk is volatile memory, all data sent to the printer is lost if
the power is turned off.
• The size of the RAM Disk is specified in settings on the printer operator
panel. For further details, consult the printer's Operation Guide.
1 In the
Device Options
adjusted in the
RAM Disk
2 Specify the
RAM Disk
your printer model and installed memory.
In the example of the FS-9500 shown above, if the memory corresponds to 32MB
minus 8 MB, the maximum available capacity for the RAM Disk is 8 MB. The value
in the RAM Disk box will not exceed 8 MB. For further details, consult the printer's
Operation Guide.
list, enable the
RAM Disk
box.
size. The maximum RAM Disk capacity may vary depending on
33
Printer Properties
check box. The memory capacity can be