Proof And Hold; Printing The Remaining Copies Of Proof And Hold Jobs - Kyocera FS-720 User Manual

Proof and Hold

1.
Access the Job Settings dialog box as indicated in the instructions for
page 107. Select Proof and Hold.
2.
Name the job for future reference when printing from the print operator panel.
• If you select Application Defined in Job Name, the application automatically names
the document.
• In the Job Name group box, select Custom to enter a name of your choice. The
name can be up to 31 characters in length.
Click OK. When printing a Proof and Hold job of multiple copies, only the first copy is printed
and the remaining copies are saved. Follow the steps below after proofing the first copy.

Printing the Remaining Copies of Proof and Hold Jobs

You can print the remaining copies of Proof and Hold jobs following the same steps as for
Printing Additional Copies of Quick Copy Jobs
operator panel to proceed. When using the Proof and Hold option, the number of copies
displayed will be one less than the total due to the existing proof copy. The printed jobs will
remain saved on the hard disk until the printer is turned off. To delete jobs manually, use the
same key operations as explained in
on page 108. Use the keys on the printer
Deleting Quick Copy Jobs
109
Useful Functions
Quick Copy on
on page 108.