Punch Settings - Kyocera Extended Driver User Manual

N
OTE

Punch Settings

3 Select the check box of an optional device shown in blue, (such as the
and a sub-dialog box appears with additional setting details.
• Double-click the option to open the sub-dialog box if a device listing is
already enabled.
• The Hard Disk Settings
option, enabling the configuration of virtual mailbox settings. For further
details, see Assigning Virtual Mailboxes
4 In the box, select the memory capacity of your printer. This setting is required to
Memory
optimize the downloading of printer fonts.
Select the check box for the finishing device the
Multi-Finisher. The
Punch Unit Setting
display the Punch Unit Setting
Select ,
2 Hole 2 & 3 Hole
attached to your finisher to enable hole punching.
dialog box appears if you select the
on page 32.
Device Options
dialog box appears. Double-click the option to
dialog box if the device listing is already enabled.
, or punch option depending on the optional Punch Unit
2 & 4 Hole
31
Printer Properties
Finisher options),
Hard Disk
list, such as Finisher or