Connection and Main Settings
Connecting the Power Cord
Warning
•
Connect the power cord to the power jack, and confirm that it is firmly inserted.
Loose connections may cause fires.
•
Make sure to connect the ground wire to prevent electrocution in case of electrical
leakage.
•
Confirm that there is no dust attached to the power plug before inserting it into
the outlet. Remove, inspect, and if necessary, clean the power plug once every six
months to a year. Dust attached to the power plug may cause fires or electrocutions.
1
Connect the power cord to the power jack on the left side of the machine.
•
Secure the power cord using the included clamp.
•
Use the screw that is attached to the cover.
2
Insert the power plug into the power outlet.
Connecting the LAN Cable
1
Connect the LAN cable to the network connector, as indicated in the diagram.
Connection and Main Settings
1
1-15