Muratec MFX-2590 User Manual page 43

6
Press [TCP/IP Settings].
7
Press [Obtain IP address].
8
Select [ON] and press [Enter].
Manually Setting the IP Address
„
Disable DHCP, and manually set the IP address.
1
Press <Setting>.
2
Press the [Management] tab.
3
If an administrator password is set, press [Admin Password].
If an administrator password is not set, proceed to step 5.
4
Enter the administrator password, and press [Enter].
5
Press [Network Settings].
6
Press [TCP/IP Settings].
1-22 Connection and Main Settings