Muratec MFX-2590 User Manual page 69

4
Enter the e-mail address, and press [Enter].
Up to 50 characters can be entered for an e-mail address.
5
Press <Start>.
• If you loaded the document in the ADF, this concludes the procedure.
• If you loaded the document on the document glass, load the next document, and press [Next
Doc]. To finish scanning, press [Complete].
Using the Address Book for Transmission
„
1
Load the document, and press <Scan>.
For details on loading documents, refer to
2
Press the [Send to E-mail] tab.
3
Specify the destination.
• If you loaded the document in the ADF, this concludes the procedure.
• If you loaded the document on the document glass, load the next document, and press [Next
Doc]. To finish scanning, press [Complete].
Note
For details on registering destinations, refer to
2-10 Scanning
"Loading Documents". (See page 1-36.)
"Loading Documents". (See page 3-2.)