Set T I N G Supply O Pt I O N S - Paxar 9800 Series Operator's Handbook Manual

S E T T I N G S U P P L Y O P T I O N S
This chapter explains how to select a ribbon, separators, feed
mode, print position, supply position, margin position, cut position,
supply type, speed, and backfeed.
CANCEL PRINT BATCH
ALL MODE ENTRY
SUPPLY
SEPARAT- FEED
RIBBON
ORS MODE
You may need to set supply options when you change supplies.
The options are listed in the table below.
Option Choices
Ribbon No/Yes/High Energy
Separators No/Yes/Long
Feed Mode Continuous/On-Demand
Print Position -99 to +99
Supply Position -300 to +300
Margin Position -99 to +99
Cut Position -300 to +300
Supply Type Aperture/Die Cut/Black
Mark/Continuous
Speed 2.5/4.0/6.0/8.0/10.0/Default
Backfeed Off/On/Extended
Verifier Disabled/Enabled
MAIN MENU
REPEAT FORMAT
SETUP
BATCH OPTIONS
PORT
CONTRAST DEFAULTS
SETTINGS
PRINT SUPPLY MARGIN
POS POS POS POSITION
DIAG.
CUT SUPPLY
SPEED BACKFEED
TYPE
Default
Yes
No
Continuous
0
0
0
0
Die Cut
Default
Off
Disabled
Setting Supply Options 4-1
4
VERIFIER