Using Linerless Supply; Adding The Peel Edge Or Shelf - Paxar 9800 Series Operator's Handbook Manual

U s i n g L i n e r l e s s S u p p l y
Linerless printing is an option that must be purchased separately
on the original printer order. The linerless option is not customer
or field-installable.
You must use thermal direct and black mark supplies for linerless
applications. The linerless printer must use on-demand mode.
For maximum platen roller life, use only wide or only narrow
supplies. Switching between wide and narrow supplies may lead
to uneven platen roller wear and possibly reduce the platen roller
life. Narrow supplies are two inches wide or less. Wide supplies
are greater than two inches.
To prevent jams, do not leave the printhead
closed (in the locked position) longer than 30
minutes without printing. Open (unlock) the
printhead before a break period, at the end of
each shift, and at the end of each day.
Your linerless machine includes a shelf already installed. You can
remove the shelf and add the peel edge if you are not using
linerless supplies.
A d d i n g t h e P e e l E d g e o r S h e l f
1. Turn off the printer.
2. Open the cover.
3. Unlock the printhead by turning the retaining latch.
4. Lift the printhead assembly using the printhead tab until the
assembly locks into place.
Loading Supplies 2-9