Batch Separators - Paxar 9800 Series Operator's Handbook Manual

B a t c h S e p a r a t o r s
A batch separator is an extra tag printed in between batches with
a pinstripe pattern. If you select "Long" for the separator, a
double-length (two tags) separator prints. For non-indexed
supply, the batch separator is always six inches long. If you have
®
the Monarch 928 stacker installed, the batch separator is 3.66
inches long. The name of the batch is shown on the batch
separator.
Changing this setting only affects new
formats sent to the printer.
To change the setting, from the Main Menu, select Setup, then
Supply. Then, follow these steps.
1. Press or until you see
2. Press Enter/Pause to set the batch separators option. You
will see the current setting, for example:
Batch Separator
SUPPLY
Separators
SEPARATORS
No
Setting Supply Options 4-3