Connecting the Server
Connect the Ethernet loopback connector to the AUI Ethernet
Step 1:
port on the system unit, as shown in Figure 4–2. If you are
Ethernet
Loopback
planning to connect to an AUI Ethernet network or a ThinWire
Connector
Ethernet network using a DECXM transceiver, you may omit this
step. After you have completed the connections in this chapter,
see Chapter 5 for information about network connections.
Figure 4–2 Connecting the Ethernet Loopback Connector
0
1
I S
D N
S 3
Connecting the Server
2
MLO-009195
Installing a Server System 4–5