Moving The Driveplate - DEC 600s Owner's Manual

Moving the Secure System Jumper
Make sure that the system unit is placed on the table or desk
Step 4: Move
Driveplate with enough room at the front of the unit to accommodate the
driveplate as you remove it.
Grasp the rear of the driveplate and gently tilt the entire plate
forward
power connector
and carefully place it aside.
Figure 11–3 Moving the Driveplate
11–8 Using the Password Security Feature
, as shown in Figure 11–3. Disconnect the driveplate
. Release the driveplate from the system unit
2
1
MLO-009207