Connecting the Workstation
Connect the Ethernet loopback connector to the AUI Ethernet
Step 5:
Ethernet
port on the system unit, as shown in Figure 3–4. If you plan to
connect to an AUI Ethernet network or a ThinWire Ethernet
Loopback
network, you may omit this step. After you have completed
Connector
the steps in this chapter, see Chapter 5 for information about
network connections.
Figure 3–4 Connecting the Ethernet Loopback Connector
3–10 Installing a Workstation System
0
1
I S
D N
S 3
2
MLO-008598