Table of Contents
Advertisement
Table 6–3 describes the startup display in more detail.
Table 6–3 Startup Display Information
Item
CPU
ASIC
MEM
NVR
SCC
NI
SCSI
ISDN
TC0
Startup Errors
If you see any error messages on the startup display screen, see
Chapter 13 for more information.
The show
The
Commands
the status of its components, memory modules, and optional
devices. The
components, revisions, and installed TURBOchannel options.
The
interface and any optional devices, such as SCSI internal disk
drives. For information about using these commands and
interpreting the results, see Chapter 13.
If You Have a
Ensure that the
Server
Chapter 10 for more information.
Description
Lists the CPU type, the firmware revision numbers and the
type of processor.
Status of the Application-specific Integrated Circuits (ASICs),
on the system board and on the I/O board.
Total amount of memory and its status.
Status of non-volatile RAM and time of year (TOY) component.
Status of the Serial Communication Controller, which includes
the keyboard and mouse tests.
Status of the Ethernet network interface (NI) and the Ethernet
address of your system.
Status of SCSI buses.
Status of ISDN/audio chip.
Status of TURBOchannel device(s). There are three
TURBOchannel slots available, 0, 1 and 2. This example
indicates one TURBOchannel device installed in slot 0.
console commands test your system and display
show
command lists the status of system
show config
command lists the status of the Ethernet
show device
environment variable is set to on. See
server
Reviewing the Startup Display
Starting Up Your System 6–7
Advertisement
Table of Contents
