Turning On the System
Workstation
To start up the DEC 3000 Model 600/700 AXP system, perform
Startup
the steps in Table 6–1.
Procedure
Table 6–1 Steps for Starting a Workstation
Step
1
2
3
To start up the DEC 3000 Model 600S AXP system, perform the
Server Startup
Procedure
steps in Table 6–2.
Table 6–2 Steps for Starting a Server
Step
1
2
3
6–4 Starting Up Your System
Description
Turn the monitor power switch to the on position ( | ).
Turn on the power switch to any other devices, including
any expansion box.
Turn the On/Off switch on the rear of the system unit to
the on ( | ) position, as shown in Figure 6–1.
Description
Turn the On/Off switch of the terminal to the on ( | )
position.
Turn on the power switch to any other devices, including
any expansion box.
Turn the On/Off switch on the rear of the system unit to
the on ( | ) position, as shown in Figure 6–1.