Running Diagnostic Tests
If the problem with your system has been fixed, after you
initialize your system, you should be able to issue the
config
not fixed, contact Digital Services as described later in section
Reporting Problems to Digital Services.
Note: Another
You can also initialize your system after running diagnostic tests
Way to Initialize
by running the same test again. If the problem has been fixed,
Your System
the test, which failed before, will complete successfully.
Figure 14–4 shows a sample display of a successful SCC test.
Figure 14–4 Initializing the System with the SCC Test
>>> test scc
T-STS-SCC-OK
>>>
14–10 Running Diagnostic Tests
command and not see any errors. If the problem is
show