Moving the Secure System Jumper
If you have a monitor or a terminal on top of the system unit,
Step 2:
Remove
move it aside now.
System Unit
Figure 11–1 shows how to remove the cover from the system unit
Cover
as follows:
1. Loosen the thumbscrew located in the center of the rear of
2. Slide the cover forward and upward
3. Place the cover safely aside for use later.
Figure 11–1 Removing the System Unit Cover
11–6 Using the Password Security Feature
the system unit
.
the system unit.
0
1
2
1
, until it releases from
2
MLO-010360