Installed Software Problems - DEC 600s Owner's Manual

Table 13–19 Installed Software Problems
Possible Cause
Default boot device is set
incorrectly.
Default startup action may
be set to halt.
System startup command
procedure was modified
incorrectly.
A problem exists with the
fixed disk.
A problem exists with the
operating system software (if
installed) on the fixed disk.
Incorrect SYSGEN
parameters for OpenVMS
AXP operating system.
Incorrect settings
for scsi_reset and
boot_reset
environment
variables.
boot_osflags
The variable
is incorrectly set.
SCSI Device Problems
Corrective Action
See Chapter 10 to set or change the
default boot device.
See Chapter 10 to change the default
startup action.
Refer to your operating system
documentation for help.
Refer to Chapter 14 for information on
running diagnostic tests.
Refer to your operating system software
documentation for help.
Perform conversational or minimum
boot. Refer to your OpenVMS AXP
operating system documentation listed
in Table 6–5.
scsi_reset
Set to 4 and
to on.
Consult your operating system
documentation.
Identifying a Problem 13–25
boot_reset