Icom IC-7100 Basic Manual page 80

5
D-STAR OPERATION <BASIC>
"TO" (Destination) setting (Continued)
D Using the TX History
The TX History stores the name and/or call sign of up
to 20 "TO" (Destination) settings that were used when
you made the calls.
NOTE: If you never transmit a call in the DV mode,
you cannot select "TO" (destination) from the TX His-
tory.
Example: Select the "Dallas" repeater in the TX His-
tory.
Push (C) to select the DR mode.
q
DR
Check whether or not "TO" is selected.
w
• If "TO" is not selected, touch the "TO" field.
Touch the "TO" field.
e
• The "TO SELECT" screen appears.
Z] to display the next page.
Touch [
r
Touch "TX History."
t
• The "TX HISTORY" screen appears.
Touch the destination name or call sign.
y
• Example: "Dallas"
• The transceiver returns to the DR mode screen, and "Dal-
las" is displayed in "TO."
If you push (C) on the TX HISTORY screen,
QUICK
you can add the selected TX HISTORY data to mem-
ory, or delete it from there.
The L, R, C or D in the instructions indicate the
part of the controller.
L: Left side, R: Right side, C: Center bottom
D: Display (Touch screen)
"TO" is selected.
The Sub name is
displayed when
a repeater is se-
lected.
"Dallas" is set in "TO."
5-18
Touch
"TO."
Touch
[Z].
Touch
"TX History."
"Dallas" repeater's
call sign is displayed.